A Showerhead That Instantly Generates Ultrafine Bubbles in a Generous Flow of Water
Product Name
Effects of Ultrafine Bubbles
Washing away too much sebum is generally said to cause dryness, but habiller is different. Backed by proven technology, habiller strikes the ideal balance, removing soiling thoroughly while keeping skin moisturized.
[habiller Increases Skin Moisture by Approx. 16% After Use]
When skin moisture was measured after applying 40℃ water for 1 minute from approx. 30 cm away from the spray face, habiller increased skin moisture by 16% compared with an ordinary shower.
[Moisture Lasts Even 15 Minutes After Use]
When skin moisture was measured immediately, 5 minutes and 15 minutes after applying 40℃ water for 1 minute from approx. 30 cm away from the spray face, habiller kept skin moisturized longer than an ordinary shower, with a difference of approx. 1.8 times after 15 minutes.
[Leaves Scalp Pores Clean and Refreshed]
Soiling in scalp pores can also cause odors. Ultrafine bubbles penetrate deep into pores and attract soiling, washing away even fine particles and keeping the scalp healthy. Invisible microscopic bubbles clean not only the skin but also the pores of the scalp, bringing out your natural beauty.
[Long-Lasting Warmth]
Mist-type sprays have had the drawbacks of lower water temperature and less water volume. With habiller, a generous flow of ultrafine bubble water wraps your entire body in warmth. Its full, satisfying spray warms your whole body even in winter.
Features
〇 Safe for drinking water
Three spray modes, all generating ultrafine bubbles
[Rainy Stream]
The highest water volume, with a soft feel on the skin. Gently envelops your whole body.
[Silky Stream]
A thin, powerful stream that can provide a massage effect when held close to the skin.
[Line Stream]
A straight stream at moderate water pressure. Its firm, satisfying spray makes it ideal for warming large areas such as the back.
Easy to Install
No tools needed; simply screw it on. If the thread does not fit, three types of adapters are included.
〇 How to install
STEP1
Make sure the main bathroom faucet is closed, then remove the existing showerhead from the shower hose.
STEP2
Attach the shower hose fitting straight onto the shower body. To prevent damage, do not attach it by turning the shower body.
[When Using an Adapter]
To attach the showerhead to a KVK, MYM or GASTAR shower hose, use the included adapter and O-ring. Please note that it may not be possible to install it on some faucets, such as those made overseas.
